LYSAGHT INTERLOK® II is suitable for use on sloped walkways and ramps constructed in accordance with AS 1657.Ramps up to 7° slope may be decked with INTERLOK® II Regular.INTERLOK® II Anti-skid may be used where cleated ramps are normally required, ie up to 20° slope. However, to ensure adequate grip across full width of such ramps, the grating must be laid transverse to the direction of travel.

LYSAGHT INTERLOK® II is suitable for use on sloped walkways and ramps constructed in accordance with AS 1657.Ramps up to 7° slope may be decked with INTERLOK® II Regular.INTERLOK® II Anti-skid may be used where cleated ramps are normally required, ie up to 20° slope. However, to ensure adequate grip across full width of such ramps, the grating must be laid transverse to the direction of travel.

No, the products are completely compatible and interchangeable.

Most fences feature galvanised steel posts and COLORBOND® steel infill sheets. Immersing the galvanised steel posts in concrete does not cause any corrosion problems but you should not allow the concrete to contact the rails or infill sheets of the fence. Check with your fencing supplier.

LYSAGHT BONDEK® can be used as formwork and as a reinforcement in composite slabs. It can be used in a wide range of building construction including steel, concrete and masonry framing system with a minimum ground clearance of 450mm. It is typically designed as a one-way slab.

COLORBOND® steel fences should not be installed within 1 kilometre of marine, severe industrial or other corrosive environments.