Yes. Overpainting instructions are available from any Lysaght office. However, please be aware that painting will void the warranty on the fence. Download Technical Bulletin TB 02 - Overpainting & Restoration of Exterior BlueScope Steel Products (May 2019, 121 KB)

Yes. Overpainting instructions are available from any Lysaght office. However, please be aware that painting will void the warranty on the fence. Download Technical Bulletin TB 02 - Overpainting & Restoration of Exterior BlueScope Steel Products (May 2019, 121 KB)

Not long at all – please feel free to contact your local LYSAGHT Living Collection® dealer to arrange a meeting.

• Fast and easy to instal
• Termite resistant with an integral ant-cap
• Fixing methods ensure minimal bounce and squeaks from the floor
• Corrosion resistance is excellent because all flooring members have been galvanised, hot dip galvanised or have a ZINCALUME® steel coating
• Pre-cut components save time/labour costs on-site
• Product shapes and fixings assist quick and easy installation
• Strength of steel can be used to reduce pier numbers and therefore footings
• Lightweight products will reduce or eliminate the need for crane hire saving you money
• Engineered and certified product backed by BlueScope Lysaght's design team

You will need 2 LYSAGHT NEETASCREEN® posts, 3 LYSAGHT NEETASCREEN® universal rails, 3 LYSAGHT NEETASCREEN® infill sheets, 1 lattice panel, 2 post infill strips, 26 self drilling fasteners and your choice of fence caps.

You will need 2 LYSAGHT NEETASCREEN® fence posts, 2 LYSAGHT NEETASCREEN® universal rails, 3 fencing infill sheets, 14 self-drilling screws and your choice of post caps.

You will need 2 SMARTASCREEN® fence posts, 1 SMARTASCREEN® bottom rail, 1 SMARTASCREEN® top rail, 3 fencing infill sheets, 14 self-drilling screws and your choice of post caps.

Yes, the LYSAGHT SMARTASCREEN® fencing system has been designed to fit into the existing post and rail system.

The product was changed in 1997. The old LYSAGHT MINI ORB® product was wider, thicker (thus heavier and more expensive) and manufactured from soft steel. The older product was also limited to a maximum length of 3000mm.

The profile is similar to LYSAGHT PANELRIB®. Every fourth rib has been increased in depth to produce the LYSAGHT MULTICLAD® profile. This increases the strength to provide an alternative to fulfil the market requirements.

You will need 2 LYSAGHT SMARTASCREEN® posts, 3 LYSAGHT SMARTASCREEN® universal rails, 3 LYSAGHT SMARTASCREEN® infill sheets, 1 lattice panel, 2 post infill strips, 26 self drilling fasteners and your choice of fence caps.

Yes. though for detailed availability you should refer to your local BlueScope Lysaght branch or distributor. Generally, it is sold as stock lengths of 7500mm.

LYSAGHT TOPSPAN® 40 is suitable for use in cyconic regions when supplied in 0.75 BMT or greater.

No. LYSAGHT SHEERLINE® Gutters are usually used on straight runs. If corners are required the plumber will need to fabricate them.

The size of the cantilever is 10% of the adjacent internal span or 500mm whichever is the lesser. Please note that the LYSAGHT TOPSPAN® 120 must be one continuous length from internal span to the end of the cantilever.

The size of the cantilever is 10% of the adjacent internal span, or 350mm, whichever is the lesser. Please note that the LYSAGHT TOPSPAN® 61 must be one continuous length from internal span to the end of the cantilever.

You will need 2 LYSAGHT® fence posts, 2 LYSAGHT MINISCREEN® universal rails, 1 LYSAGHT MINISCREEN® centre rail, 3 LYSAGHT MINISCREEN® infill sheets, 17 self drilling hex. head screws #10-16x16, 7 Ripple Tek® or RippleZip®** screws and your choice of fence caps.

**NOTE: Ripple Tek® is a registered trademark of ITW Buildex

You will need 2 LYSAGHT® fence posts, 3 LYSAGHT MINISCREEN® universal rails, 1 LYSAGHT MINISCREEN® centre rail, 3 LYSAGHT MINISCREEN® infill sheets, 1 lattice, 27 self drilling hex. head screws #10-16x16, 7 Ripple Tek® or RippleZip®** screws and your choice of fence caps, 2 post infill strips (optional)

**NOTE: Ripple Teks® is a registered trademark of ITW Buildex

The standard heights are 1200mm, 1500mm, 1800mm and 2100mm.

Yes. However, specific fixing requirements will need to be met. Please contact us for more information.

Yes, it can. This means the support spacings can be increased. Please contact us for more information.

Yes, though for detailed availability you should refer to your local Lysaght branch or distributor. Generally it is sold as stock lengths of 7500mm. Please contact us for more information.

Generally LYSAGHT TOPSPAN® 40 is sold in stock lengths of 7500mm. Custom cut lengths may be considered for large volume orders. Contact your local Lysaght branch for further information.

"LYSAGHT CUSTOM ORB®" is the name given to the "corrugated iron" cladding shape made by Lysaght. The name came from the customs stamp on the corrugated iron when it was first imported from England about 150 years ago. The stamp was of the royal "orb" (ball shape on top of the royal staff). The colour reference relates to the type of steel used many years ago. The "blue" was referred to as the soft steel and the "red" referred to the hard or strong steel. The "red" in the name has been dropped over the years.